E011
Button / control input fault
A control key may be stuck or receiving continuous input.
Full code guide →Browse faster
Popular error-code lookups
Start with frequently encountered code families, then use search or diagnosis for a specific appliance.
This page shows an editorial shortlist. Browser-local visit counts can also personalise your recently viewed list.
E09
Internal dishwasher fault
Bosch recommends professional diagnosis for this fault code.
Full code guide →E12
Limescale in heating system
Limescale build-up is affecting the heating system.
Full code guide →E14
Filling/water inflow fault
The dishwasher detects a filling-system or water-inflow problem.
Full code guide →E15
Water in base / leak protection active
The anti-flood system has detected water in the base.
Full code guide →E16
Filling/water inflow fault
The dishwasher detects a filling-system or water-inflow problem.
Full code guide →E19
Dispenser or internal valve fault
Bosch identifies a dispenser or internal-valve problem.
Full code guide →E22
Filters blocked
The dishwasher detects blocked or incorrectly seated filters.
Full code guide →E23
Waste-water pump fault
A fault with the waste-water pump has been detected.
Full code guide →E24
Drainage problem
The dishwasher cannot drain correctly.
Full code guide →AE
Leak detected
Water may have entered the base pan or the leak sensor has been triggered.
Full code guide →AE
Rotation/gear error
The gears responsible for rotating the drum cannot operate normally.
Full code guide →CL
Control/child lock
Control Lock or Child Lock is active.
Full code guide →E3
Drain motor error
The drain motor is not operating normally.
Full code guide →FE
Overfill error
The washer detects an overfilled tub.
Full code guide →FF
Freeze failure
Cold weather has frozen part of the water inlet/drain path.
Full code guide →IE
Water inlet error
The washer did not fill with enough water in time.
Full code guide →LE
Motor/rotation error
The motor may be stuck or unable to rotate normally.
Full code guide →OE
Drain error
Water is not draining within the expected time.
Full code guide →PE
Pressure sensor error
The washer has trouble detecting water level.
Full code guide →PF
Power failure
The washer reports an interrupted power supply.
Full code guide →UE
Unbalance error
Laundry is bunched to one side or the washer is not level.
Full code guide →dE
Door error
The washer cannot confirm the door/lid state.
Full code guide →dL
Door not locked
The locking mechanism cannot lock normally.
Full code guide →tCL
Tub Clean reminder
The washer is prompting for a tub-clean maintenance cycle.
Full code guide →tE
Temperature sensor error
The temperature sensor reading is abnormal.
Full code guide →vS
Vibration sensor error
The washer reports a vibration-sensor problem.
Full code guide →0
Drum Clean reminder
A maintenance reminder is active rather than a fault.
Full code guide →11E
Low water level detected
The washer detects an unexpectedly low water level.
Full code guide →12E
Button issue
One or more control buttons may be sticking.
Full code guide →13E
Signal communication issue
The washer reports a control communication problem.
Full code guide →14E
Button issue
One or more control buttons may be sticking.
Full code guide →1C
Low water level check
The dishwasher stops early and may keep trying to drain with very little water.
Full code guide →1C
Water level sensor issue
The washer is not receiving a normal water-level sensor reading.
Full code guide →22E
Fresh-food fan error
The refrigerator fan may be blocked, iced over, or not operating correctly.
Full code guide →3C
Wash/circulation motor issue
The dishwasher fills but does not begin active spray/washing.
Full code guide →